Jump to content
Covecube Inc.

saitoh183

Moderators
  • Content Count

    70
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by saitoh183

  1. You can put as much parity as you want it depends on your level of comfort with fault tolerance. If you use 1 parity drive, then you are safe against 1 failure. If 2 drive die at the same time,well your screwed. Your parity drive has to always be as large as large or larger than the biggest drive in your pool. But at the end of the day the number of parity you put comes down to how paranoid you are about protection
  2. Ah ok, well Drivepool just merges your drive, it wont do anything that would cause them to break physically
  3. Before saying you lost your drives, Did you try to connect them to another machine? Drivepool cant break drives.
  4. reboot and update fixed the issue with the file. Thanks !
  5. Will it fix the issue I'm having or is my file stuck like this?
  6. It does happen randomly but then it comes back on its own but not this time. It always happens on files and i havent noticed if it happens on a drive connected to the Syba controller. I often notice the problem when I'm moving stuff around and I get a error.
  7. The actual disk is the same as the screenshot i post DP ver: 2.1.1.561 Service folder : https://drive.google.com/open?id=0B-nxnSB-4zQ4eF9MNllCclNuMVk
  8. I had corruption on a db and when i tried to restore, it kept failing. I then checked the security on the restore db and saw the above. Sometimes this happens on other files and i just wait awhile and the security comes back on its own but that doesnt seem to be the case this time.
  9. I will give that a try Silverstone Strider Essential ST60F-ES 600W Power Supply ATX 24PIN 120MM as for the SSD i dont recall
  10. Specs: Operating System Windows 10 Pro 64-bit CPU Intel Pentium G620 @ 2.60GHz Sandy Bridge 32nm Technology RAM 16.0GB Dual-Channel DDR3 @ 667MHz (9-9-9-24) Motherboard Gigabyte Technology Co. Ltd. Z77X-UD3H (Intel Pentium CPU G620 @ 2.60GHz) 28 °C Graphics SyncMaster (1920x1200@59Hz) Intel HD Graphics (Gigabyte) Storage 3726GB Seagate ST4000DM000-1F2168 (SATA) 1863GB Seagate ST2000DL003-9VT166 (SATA) 2794GB TOSHIBA DT01ACA300 USB Device (USB (SATA)) 1863GB Seagate ST2000DL003-9VT166 (SATA) 55GB Corsair CSSD-F60GB2 (SSD) 4657GB TOSHIBA
  11. i do see in the event viewer a warning : Reset to device, \Device\RaidPort0, was issued. To get the system back up, i had to unplug the sata cable of a single drive and then boot the machine, windows booted into diag mode and then once it was done i restarted again. this time the machine went straight into windows. Then i shutdown, plug back in the sata cable of the drive, turn on and the machine when back in normally...i have had to repeat this exact same pattern twice in order to get back in.
  12. I migrated a friend to windows 10 a few weeks ago and he had DP installed on WHS2011. I reinstalled DP and the pool came back up. Now the problem...At first 3 drives kept going missing and wouldnt come back up till i restarted the machine. This actually killed a 2TB drive and caused bad sectors on a brand new 5tb we had just put in.I ended up figuring out that the problem was the PCIE sata card. So i removed it and replaced it with a mediasonic probox. Now i thought all the problems were fixed but now every time i go into the balancer options and into placement, the GUI stops responding, T
  13. No you can't remove them. But even if they are in the list, if you don't click on the add option, they won't be added to your pool. Dp doesn't do this automatically.
  14. You could use Stablebit Clouddrive to add drives from another machine to your pool because it supports mapping network drives as local drives so you can then add those drives to DP. Try it out for 30 days
  15. Your right...Unplugging the drives (no need to remove them just unplugg the sata (from either end) or power cable) is just to insure that windows doesnt use one of them to store the reserve partition.
  16. You will need to manually manage this. In DP you can go in the Balancer settings and under placement Filter, you can choose what data goes where and if it is duplicated data, unduplicated data or both. You can simply remove the checkbox on both and DP will not put data on that drive. But as i said, you will need to manually manage this.
  17. DP + Scanner will not protect you against drive failure. Scanner, you can say, is a warning system and will execute the evacuate command if possible but if your drive just dies or your catch the problem too late, Snapraid will be your savior. I have your setup and snapraid did cause me issues when i had replaced a few drives. I just ended up deleting the parity content and starting fresh
  18. With the current version of clouddrive, how is the plex performance with scanning in new media, refreshing media or launching a library update in terms of speed? Currently I am using netdrive2 and playback is decent, my users haven't complained to much. But when it comes to scanning, especially if clicking on update library, it is painfully slow. I have around 400 TVshows and it has now been running for 3 days and it has probably queue all the auto library partial update.. So I assume it will take very long. I turned off all the maintenance schedule that do optimize media and such because of
  19. Go into the Balancing settings and under Balances > Prevent Drive OverFill ,set the options Also you will want to go into Drive Usage Limiter to set the fill option. If you are using File Placement rules, there is a disk full slider there as well that can be set
  20. What are you using Clouddrive for if you are using FFS to mirror? Im also looking for a solution to mirror my pool...I was thinking of using Goodsync to sync directly to Clouddrive but i dont like the fact that i can only access my data via clouddrive. So if im away and i need a file that is in the clouddrive on my Gdrive, im kind of screwed.
  21. I dont think this is a DP issue because This is how windows works with network deletion. The recycle bin is made for local drive content deletion. So if your on your DP from the local machine and delete something, it will go to the recycle bin. But from the network it is a permanent deletion like when you delete a file using Shift+Del or empty the recycle bin. If you want to avoid deletion, then set your network share to Read only would be the way to go as you mentioned.
  22. Well what im looking for is a a vps or dedicated server that i can host plex and mount my google drive for my content. This is for my family not me... Since i cant use Cloud Drive, my only other option is to use Goodsync to keep my Gdrive and local content in sync. So i have the data upload covered. I need a a vps that can handle some transcoding but i will try to convert all my media to mp4 format which should allow for direct streaming instead of having to transcode, Im still shopping around cuz i already have a FeralHosting (10 GPB/m ) seedbox but they dont allow root access so i cant mount
  23. Thanks for the reply...guess i will have to find another solution for my cloud plan.
  24. Im loving this sweet piece of software and it is exactly what i was looking for in order to add other drives in another pc to my drivepool. But i have a question in regards to google drive. I have a plex setup and a slow upload (10mbit) so when i get too many people outside my home streaming, its not always the greatest. So my plan was to get a dedicated server or vps and install plex on it and using CloudDrive, mount my gdrive with a portion of my library. Now i have tested plex with Clouddrive on my Local plex and it played the video no problem. My plan was to mount Gdrive on my loca
×
×
  • Create New...