Jump to content
  • 0

Want to Use Immediate and Daily Balancing Simultaneously


DP_

Question

I would like to use immediate balancing and daily balancing simultaneously by setting the timing of automatic balancing.

Currently, in the Drivepool's balancing settings, it is not possible to apply immediate balancing and daily balancing at the same time.

Since I am using SSD Optimizer in my system, I have set it up to start balancing automatically when the capacity of the SSD becomes low.

However, as the system's speed decreases during balancing, I would like to be able to automatically balance even during times when I'm not using the PC every day.

At this time, I would be even happier if I could individually set immediate balancing to start balancing when the balance rate or the required amount of movement is reached, and daily balancing to start balancing every day regardless of the balance rate, etc.

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0
On 1/31/2024 at 2:34 AM, Shane said:

Hi DP_, I've submitted your feature request (I like it). If you have other feature requests you'd like to send to StableBit directly, you can use the Contact Form to do so.

Hello, Shane.
Thank you for submitting the feature request on my behalf.
I will make sure to send feature requests through the Contact Form in the future.
Thank you very much.

Link to comment
Share on other sites

  • 0

Hello, Christopher (Drashna).

 

On 1/31/2024 at 10:00 PM, Christopher (Drashna) said:

Is there a reason the "not more often than every X hours" option doesn't work for you? 

 

Yes, in my scenario, the combination of immediate balancing and "not more often than every X hours" doesn't work very well. In my scenario, because there are instances where I frequently write several hundred gigabytes of files, it's necessary to start immediate balancing once the SSD's capacity reaches a certain level of occupancy.

Otherwise, it would either become impossible to write to Drivepool due to insufficient free space on the SSD, or it would require bypassing the SSD and writing directly to slower HDDs. Therefore, immediate balancing without using "not more often than every X hours" is essential in my environment.

Moreover, it would be great to have a feature to start balancing at a specific time every day, disregarding the threshold set in "Automatic balancing - Triggers." If, during my sleeping hours, Drivepool could automatically start balancing to maintain free space for SSD Optimizer, it would reduce the balancing time occurring during waking hours. This would minimize the performance degradation of Drivepool during waking hours, allowing for more efficient operation of Drivepool.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...