Jump to content
Covecube Inc.

KingfisherUK

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by KingfisherUK

  1. So, nearly two and a half years down the line and a few small changes have been made: Main ESXi/Storage Server Case: LogicCase SC-4324S OS: VMWare ESXi 6.7 CPU: Xeon E5-2650L v2 (deca-core) Mobo: Supermicro X9SRL-F RAM: 96GB (6 x 16GB) ECC RAM GFX: Onboard Matrox (+ Nvidia Quadro P400 passed through to Media Server VM for hardware encode/decode) LAN: Quad-port Gigabit PCIe NIC + dual on-board Gigabit NIC PSU: Corsair CX650 OS Drive: 16GB USB Stick IBM M5015 SAS RAID Controller with 4 x Seagate Ironwolf 1TB RAID5 array for ESXi datastores (Bays 1-4) Dell H310 (IT Mode - passed through to Windows VM) + Intel RES2SV240 Expander for Drivepool drives (Bays 5-24) Onboard SATA Controller with 240GB SSD (passed through to Media Server VM) ESXi Server (test & tinker box) HP DL380 G6 OS: VMWare ESXi 6.5 (custom HP image) CPU: 2 x Xeon L5520 (quad core) RAM: 44GB ECC DDR3 2 x 750W Redundant PSU 3 x 72GB + 3 x 300GB SAS drives (2 RAID5 arrays) Network Switch TP-Link SG-1016D 16-port Gigabit switch UPS APC SmartUPS SMT1000RMI2U Storage pools on the Windows storage VM now total 34TB (mixture of 1,2 and 4TB drives) and still got 6 bays free in the new 24 bay chassis for future expansion. There's always room for more tinkering and expansion but no more servers unless I get a bigger rack!
  2. Hi Stuart, What type/speed of disks are you using, what controller are you using and what are the ambient room temps like? I have a 24-bay LogicCase SC-4324S in a rack in my study, which is quite small space, currently running with 18 drives and even in the recent hot UK weather, none of my drives got above about 34-35 degrees C. Right now (Saturday AM, ambient room temp of 22 degrees) they are mostly running at 25-26 degrees (as reported by StableBit Scanner). These are mainly 5400rpm drives and set to spin down when not in use, but even the few 7200rpm drives I have are only 2-3 degrees warmer. I did have an issue in the past where the HBA I was using wasn't properly supported in Windows Server 2016 and wouldn't allow the disks to spin down regardless of any power management settings, even though it had worked perfectly under Server 2012.
  3. I've currently got an eleven disk, 32TB drive pool which I now want to "split" into 3 separate pools of 6, 6 and 2 disks (adding 3 new disks in). Basically the plan is to scrap the old single pool, create the three new ones and then re-organise the data structure on them afterwards. What's the best/quickest method for doing this? My thinking is to turn off duplication (not much data duped anyway), force remove each disk in turn (quickest option to "break up" the old pool) and then create each new pool in turn. Would this work or will DP re-detect the existing pool config on the disks? Hope that all makes sense...
  4. Thanks Christopher, that sorted it. Now for the joys of a full rebuild...
  5. I'm running Windows Server 2016 with Essentials Role installed with both Scanner and DrivePool. Something has gone screwy with Essentials and I can no longer open or use the Dashboard so looks like I'll be rebuilding the OS. No issue with DrivePool as it also installs the desktop application which allows me to manage the pool and deactivate the licence. However, since Scanner installed the Homeserver plugin for the dashboard, there is no desktop application to allow me to deactivate the licence. Is it just a simple matter of re-installing the "normal" version of Scanner or will that cause more problems?
  6. Ok, a little late to the party but better late than never As it stands: Main File/Media Server Case: Chenbro RM42416 OS: Windows Server 2016 Standard (with Essentials role) CPU: Intel i5 2405S Mobo: Intel DQ67OW RAM: 4 x 4GB GFX: On CPU PSU: Generic 750W ATX OS Drive: Samsung 840 EVO 120GB Storage Pool: Pool 1 - 2TB (2 x 1TB), Pool 2 - 25TB (4 x 1TB, 9 x 2TB, 1 x 3TB) - mixture of HP, Seagate and Samsung drives. (yes, I am phasing out the Seagates ) Misc Storage: 500GB temp download drive, 60GB app data SSD, 500GB backup drive. HDD Controller: Dell H310 (flashed to non-RAID SAS HBA) plus Intel RES2SV240 Expander ESXi Server (new acquisition - still tinkering ) HP DL380 G6 OS: ESXi 6.0 (HP custom image) CPU: 2 x Xeon L5520 (quad core) RAM: 140GB ECC DDR3 2 x 750W Redundant PSU 3 x 72GB + 3 x 300GB SAS drives (2 RAID5 arrays) Network Switch Netgear GS724T v3 UPS APC SmartUPS SMT1000RMI2U Ultimate plan is to make the main file/media server into purely a file server and virtualize the domain controller, media server etc. onto the ESXi host as separate machines (just for the fun of it)
  7. Perfect, thanks for the quick reply.
  8. I'm planning to upgrade my (home) server from Windows Server 2012 to Server 2016 in the near future, but will be making no hardware changes. I've checked the FAQ's and see that for DrivePool I can just deactivate the installation on the old OS and then re-activate when installing it on the new build. However, for Scanner it says I need to contact support to transfer the licence. If I'm not making any hardware changes, does this still apply given that the licence is - according to the FAQ - linked to the hardware?
×
×
  • Create New...