Stablebit scanner and Storage spaces

[acdcking12345 0]

So I have a drivepool with 6 drives, and a storage spaces with 8 drives.

 

When I look at the scanner, it shows the storage spaces as just one large disk. Will the scanner still scan the individual drives?

 

 

[Christopher (Drashna) 631]

Not currently.

 

Specifically, Microsoft changed some of the low level information for the disks when they added the Storage Spaces feature.  This means that the current way only gets the Storage Spaces array and not the individual disks that make up the array.

 

We are aware of this issue, and how to resolve it. The issue is how to present the information. And since at best, it would require a significant overhaul to StableBit Scanner, it's been on the back burner for now. 

Once StableBit CloudDrive has been officially released, we hope to address this and other issues.

[zeroibis 4]

Now that StableBit CloudDrive is out can we hope for this issue to be addresses in the near future?

Also I do not see this issue in the issues listed under the development status section.

[Christopher (Drashna) 631]

Maybe.  But this is still would require a massive overhaul to StableBit Scanner.  Querying the SMART data for the drives is trivial, but we'd have to rewrite the UI from the ground up, basically.