steffenmand Posted December 3, 2015 Share Posted December 3, 2015 Just got this error while adding files to my drive - now its not usable Know amazon is experimental, therefore no important files there UPDATE:Pressing update on the main, made the drive available again. This however happens everytime you transfer several gb to the drive. Seems like it times out (no treads will run meanwhile either according to the UI) The transfer speed is also severely limited - goes from 140 mb/s to around 3-6 mb/s - is this due to the encryption? Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted December 4, 2015 Share Posted December 4, 2015 Do you know what version of CloudDrive that you created the drive with? And what was the cache size for the drive? And could you grab the logs: http://wiki.covecube.com/StableBit_CloudDrive_Log_Collection Quote Link to comment Share on other sites More sharing options...
0 steffenmand Posted December 4, 2015 Author Share Posted December 4, 2015 .422 400 GB cache Amazon Cloud Drive 10 MB chunks Problem started after ~10GB - the drive stalls and the label says ?. If i click the + to add a new drive and click back, the program goes into a mode where i can't go back and fourth anymore and is broken. Seems as if the drive times out and i need to press update manually to get it back (unless i clicked the arrow back, then the program gets stuck and i can't press the + where i can press update) I can see that after the transfer is complete the UI shows threds being uploaded/downloaded if i go under the troubleshooting and open up the window, The Drive UI is just like the attachment with white/black crossed over showing no details Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted December 7, 2015 Share Posted December 7, 2015 When this happens, try restarting the StableBit DrivePool Service, or try rebooting the system. Also, grab drive logs if/when this happens again. Also, you can see the active status if you use the "I/O Threads" option in the "Troubleshooting" menu (gear icon). Quote Link to comment Share on other sites More sharing options...
0 steffenmand Posted December 8, 2015 Author Share Posted December 8, 2015 After a reboot i havent experienced the complete timeout again. However i still encounter that the UI shows 0 bits/s up and down, while transferring large files to my virtual drive. Troubleshooting I/O Threads shows nothing active at all. These only starts after full transfer After around 7.5 gb, the transfer speed goes from 140 mb/s to 0 bytes/s - 5-7 mb/s (seems to be in small intervals it goes up from 0 bytes/s to 5-7 mb/s and then back down to 0 bytes/s). Is it due to full encryption that there is this limited speed while transferring to my local drive ? The disk with the cache has plenty of space, so it's not a spacing issue. 200 gb takes around 9 hours to transfer to my virtual drive with this speed, before the uploading even starts. (unless it is uploading but just not showing it in the UI. Version is .422 Experimental Amazon Cloud Drive 200 GB Cache 50 MB chunks Full drive encryption 987 gb space left on drive. Quote Link to comment Share on other sites More sharing options...
0 modplan Posted December 9, 2015 Share Posted December 9, 2015 After a reboot i havent experienced the complete timeout again. However i still encounter that the UI shows 0 bits/s up and down, while transferring large files to my virtual drive. Troubleshooting I/O Threads shows nothing active at all. These only starts after full transfer After around 7.5 gb, the transfer speed goes from 140 mb/s to 0 bytes/s - 5-7 mb/s (seems to be in small intervals it goes up from 0 bytes/s to 5-7 mb/s and then back down to 0 bytes/s). Is it due to full encryption that there is this limited speed while transferring to my local drive ? The disk with the cache has plenty of space, so it's not a spacing issue. 200 gb takes around 9 hours to transfer to my virtual drive with this speed, before the uploading even starts. (unless it is uploading but just not showing it in the UI. Version is .422 Experimental Amazon Cloud Drive 200 GB Cache 50 MB chunks Full drive encryption 987 gb space left on drive. Sounds like amazon throttling you after sustained heavy upload to me... Quote Link to comment Share on other sites More sharing options...
0 steffenmand Posted December 9, 2015 Author Share Posted December 9, 2015 Sounds like amazon throttling you after sustained heavy upload to me... cant be because it is the transfer to my virtual drive (in this case drive E:) so it is before upload. Quote Link to comment Share on other sites More sharing options...
Question
steffenmand
Just got this error while adding files to my drive - now its not usable
Know amazon is experimental, therefore no important files there
UPDATE:
Pressing update on the main, made the drive available again.
This however happens everytime you transfer several gb to the drive. Seems like it times out (no treads will run meanwhile either according to the UI)
The transfer speed is also severely limited - goes from 140 mb/s to around 3-6 mb/s - is this due to the encryption?
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.