Upgrade Stable 2.0.0.400 - Duplication lost???

[dnof 0]

I have a 2 drive pool (2 x 2TB)

I have about 1.2TB of data on these drives, duplicated

I upgraded from 2.0.0.380 Beta to 2.0.0.400.  

 

After doing this I can still access data fine from the DrivePool. However, StableBit is showing:

 

Unduplicated 3.14MB,

Duplicated 31.4kb,

Other: 2.15TB

 

It also indicates that Statistics are incomplete.

 

In addition, it is showing a status of duplcating  at 3.1%???

 

Any ideas???

[Christopher (Drashna) 633]

It sounds like it is reindexing/remeasuring the pool. 

This is normal. 

 

If this takes an excessive amount of time... then it may be stuck, and resetting the DrivePool settings may correct the issue (but will force it to reindex it again).

http://wiki.covecube.com/StableBit_DrivePool_Q2299585B

[dnof 0]

Thanks - that is better.

 

 

 

It sounds like it is reindexing/remeasuring the pool. 

This is normal. 

 

If this takes an excessive amount of time... then it may be stuck, and resetting the DrivePool settings may correct the issue (but will force it to reindex it again).

http://wiki.covecube.com/StableBit_DrivePool_Q2299585B

[Christopher (Drashna) 633]

Glad to hear.  If you have any other issues, don't hesitate to ask us.