Beaker1024 Posted January 9, 2015 Share Posted January 9, 2015 So I plugged a removal HDD in for the first time and instantly got a SMART error failing drive less than 24hrs. Over 1808 Reallocated Sectors Count So I let it do a sector scan for a while and it came up completely clean! Does it matter that I have 80% of the drive partitioned and encrypted with TrueCrypt? I know that SMART is a log of stats on the drive vs the scanning of the sectors to seeing if they are readable physically on the disk. How do you handle having SMART reading saying the disk is dieing soon and the scan / usage be perfectly fine? Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted January 9, 2015 Share Posted January 9, 2015 Reallocated sectors are different from bad sectors. Well, in that they were bad, but have been remapped. However, a large number of remapped sectors like this can indicate a serious defect/problem with the disk. Additionally, a large number of remapped sectors can adversely affect performance on the pool (read and write), as the heads are jumping every which way, as the sectors for affected sections are not longer sequential. In this case, I would recommend RMAing the drive if it's under warranty, or use it for nothing important or performance sensitive. And no, TrueCrypt should not adversely affect either the scan or the SMART data like this. Quote Link to comment Share on other sites More sharing options...
0 Beaker1024 Posted January 9, 2015 Author Share Posted January 9, 2015 Thanks for the information! It's just my backup drive that gets connected decrypted and a sync program usually only needs 5 minutes to put any new or modified files to it. Then it's disconnected and waits till the next backup/sync. Performance is of the lowest priority and it'll never be part of a DrivePool. Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted January 11, 2015 Share Posted January 11, 2015 Not a problem. However, if that reallocated sector count keeps on increasing, stop using the disk and replace it. Because this usually indicates a physical defect or problem with the disk. Quote Link to comment Share on other sites More sharing options...
0 alternativesurfer Posted January 12, 2015 Share Posted January 12, 2015 I have a similar question, didn't know if I should open another topic: I have a drive that was just flagged by Scanner as having 9 unreadable sectors, however if I run chkdsk with find and repair settings Windows is unable to find any bad sectors. Do I trust scanner / windows, and what is my next step to take? Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted January 13, 2015 Share Posted January 13, 2015 Alternativesurfer: Sometimes, other issues can cause "false positives" in StableBit Scanner's service scan. Specifically cable, controller or sometimes power issues. You can clear the damaged sectors, and let StableBit Scanner rescan the disk. To do so, open up the StableBit Scanner UI. From there, find the disk in question, and click on the "+" on the left hand side of the disk. Find the button with a green circle, with a green arrow in it. Click on this and select the "mark all unreadable blocks as unchecked" This will cause StableBit Scanner to rescan the disk. If the damage comes back, then there may be an issue with the disk that isn't being detected by DrivePool. However, did you run "chkdsk /r"? Specifically, the "/r" flag is what tries to find and repair these damaged sectors Additionally, running "chkdsk /b" may be better and detecting this issue. Additionally, the act of scanning the disk, or running the chkdsk may have fixed the issue that the disk was having. Or it could have been a transient issue with the controller for the disks. If the "damage" doesn't come back, you may want to run the "burst test" option for the disk (Right click on it, select "burst test") Let this run 24 hours (or at least overnight). If it comes back with issues, then you may have an issue here. Quote Link to comment Share on other sites More sharing options...
0 alternativesurfer Posted January 13, 2015 Share Posted January 13, 2015 Chris, Thank you so much. I marked them as unchecked and after performing another scan everything came back clean I will run the burst test tonight to confirm without a doubt that there isn't any problem with the disk. Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted January 13, 2015 Share Posted January 13, 2015 You are very welcome. Hopefully, there is nothing wrong with the disks at all! Quote Link to comment Share on other sites More sharing options...
Question
Beaker1024
So I plugged a removal HDD in for the first time and instantly got a SMART error failing drive less than 24hrs. Over 1808 Reallocated Sectors Count
So I let it do a sector scan for a while and it came up completely clean!
Does it matter that I have 80% of the drive partitioned and encrypted with TrueCrypt?
I know that SMART is a log of stats on the drive vs the scanning of the sectors to seeing if they are readable physically on the disk.
How do you handle having SMART reading saying the disk is dieing soon and the scan / usage be perfectly fine?
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.