Christopher (Drashna) Posted November 14, 2015 Share Posted November 14, 2015 I am sorry to say that it doesnt work, Sandisk SSDs are still showing empty SMART window. I did even tried "NoWmi" reboot and "Unsafe" reboot : no change Want me to send you one Sandisk and Crucial SSD? lol, not necessary. The BitFlock ID should be enough. Alex has been very busy, which is why we haven't gotten to this yet (Sorry). However, I will bug Alex about this directly, so we can get it (and related) fixed. Quote Link to comment Share on other sites More sharing options...
gsmer Posted November 2, 2016 Share Posted November 2, 2016 Hi, I've the same SSD, running v2.5.1.3062 on Windows 10, and get the same issue. I'm updating regarding another issue as you're on it, I'll try to be clear in my explanation Since I installed scanner I've been notified frequently about my ssd overheating. I didn't pay attention because the values were absurd but it became annoying so I've been monitoring with speccy this week as it was mostly happening during gaming session. The value never got over 40° and the max manifactured value is 54° so there's absolutely no reason to alert. Tuesday checking the forum i discovered I could show the temperature column in scanner (newb there hey !) so I did it and was rather surprised to see that I had the exact same value as in speccy. So it seems scanner can get the real temperature BUT notification sends crap. Here a copy of one of the mail : StableBit Scanner Heat Warning on "XXXXX". One or more disks are overheating: SanDisk SDSSDXP240G - 132˚C (Maximum: 70˚C) Model: SanDisk SDSSDXP240G Serial number: 140612401269 Those mails are followed by the end of alert every time like 1 minute later. Last strange thing, but didn't test it long enough to be statistically significative. It seems that the bug won't happen if scanner is opened in windows (if the gui is open). Good luck tackling the issue, let me know if you need more details. Regards, Gaël Quote Link to comment Share on other sites More sharing options...
Christopher (Drashna) Posted November 4, 2016 Share Posted November 4, 2016 gsmer, There are two (well, three) different places that the temperature can be pulled from. And it sounds like the SSD in question is misreporting one or more of these settings. And likely the SMART value. Have you tried enabling the "Smart" "NoWmi" option? http://wiki.covecube.com/StableBit_Scanner_Advanced_Settings That may fix the issue you're seeing. Quote Link to comment Share on other sites More sharing options...
gsmer Posted November 4, 2016 Share Posted November 4, 2016 I've checked the option, i'll let you know in a couple of days if it worked or not. Quote Link to comment Share on other sites More sharing options...
Christopher (Drashna) Posted November 5, 2016 Share Posted November 5, 2016 Well, let me know either way, but hopefully, it does fix the issue. Quote Link to comment Share on other sites More sharing options...
gsmer Posted November 11, 2016 Share Posted November 11, 2016 You were right it does fix the issue, thanks Quote Link to comment Share on other sites More sharing options...
Christopher (Drashna) Posted November 12, 2016 Share Posted November 12, 2016 Fantastic! I'm glad to hear that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.