RJGNOW Posted July 31, 2015 Share Posted July 31, 2015 I have attached the error reports. ErrorReport_2015_07_30-08_01_59.7.zip Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted July 31, 2015 Share Posted July 31, 2015 What part is crashing specifically? The UI? The service (eg, showing up the event viewer or in the UI as "cannot connect to service"? And what build of StableBit Scanner are you using (it should be listed in the "Applications" section, I think, but definitely in the control panel) Quote Link to comment Share on other sites More sharing options...
0 RJGNOW Posted August 1, 2015 Author Share Posted August 1, 2015 Version 2.5.2.3100 BETA Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted August 2, 2015 Share Posted August 2, 2015 Is this preventing the service from starting? If it is, could you grab the contents of "C:\ProgramData\StableBit Scanner\", and upload it via the box.com upload widget at the bottom of the linked page: http://wiki.covecube.com/StableBit_Scanner_Freeze Additionally, I hate to ask, but does resetting your settings help? http://wiki.covecube.com/StableBit_Scanner_Q4200749 Quote Link to comment Share on other sites More sharing options...
0 RJGNOW Posted August 3, 2015 Author Share Posted August 3, 2015 It doesn't appear to effect the scanner, I mean it seems to open just fine and run. Should I just ignore the error in the logs. ? Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted August 3, 2015 Share Posted August 3, 2015 If it's not interfering with the normal functionality of StableBit Scanner, then you should be fine. I've flagged the files anyways, just in case though. That way, the issue can be fixed in future builds. https://stablebit.com/Admin/IssueAnalysis/18736 Quote Link to comment Share on other sites More sharing options...
0 RJGNOW Posted August 4, 2015 Author Share Posted August 4, 2015 I have noticed that it only seems to happen when the Server back up starts, so that's twice a day like clock work. Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted August 4, 2015 Share Posted August 4, 2015 Ah, I knew I should have asked about that. Specifically, this is being caused by the backup then. When Windows Server Backup, it works by creating and mounting VHD/VHDX files (hence the 2040GB limit on WHS2011, as that's the limit of VHD files actually). Server 2012 and 2012R2 use VHDX files which have a MUCH larger limit, though. The "file not found" error is probably that the file system scan is still occurring when the backup finishes, and unmounts the VHD files. You may be able to fix this by setting a work window for StableBit Scanner that is outside of the backup window. But it shouldn't be necessary. Quote Link to comment Share on other sites More sharing options...
0 RJGNOW Posted August 5, 2015 Author Share Posted August 5, 2015 Ok, so I'll just ignore it.. Thanks for all the help! Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted August 6, 2015 Share Posted August 6, 2015 You're very welcome! And if it makes you feel better, for a long while, I would get disk errors in the dashboard every time the backup ran. Quite irritating. Especially as there was no way to actually fix it. Quote Link to comment Share on other sites More sharing options...
Question
RJGNOW
I have attached the error reports.
ErrorReport_2015_07_30-08_01_59.7.zip
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.