Motherboard is Asus X370 Prime Pro (8 Sata Ports). I have a total of 13 drives, with 1 of them being an SSD (Boot Drive). To connect the maining 5 drives, I have one of these plugged into the NVME slot on the board: (This was purchased from Amazon) "IO Crest Internal 5 Port Non-Raid SATA III 6GB/s M.2 B+M Key Adapter Card for Desktop PC Support SSD and HDD. JMB585 Chipset"
When I use the latest released version, it tries to scan one of the drives on the nvme adapter and after about 20 hours, it's only about 7% complete (on a 4 TB size drive). If I try 2.5.5.3293, it shows it being stuck on "Scanning File System"
Is there a setting I can change? Is there a maximum number of disks that scanner can handle?
Question
mayorville
Motherboard is Asus X370 Prime Pro (8 Sata Ports). I have a total of 13 drives, with 1 of them being an SSD (Boot Drive). To connect the maining 5 drives, I have one of these plugged into the NVME slot on the board: (This was purchased from Amazon) "IO Crest Internal 5 Port Non-Raid SATA III 6GB/s M.2 B+M Key Adapter Card for Desktop PC Support SSD and HDD. JMB585 Chipset"
When I use the latest released version, it tries to scan one of the drives on the nvme adapter and after about 20 hours, it's only about 7% complete (on a 4 TB size drive). If I try 2.5.5.3293, it shows it being stuck on "Scanning File System"
Is there a setting I can change? Is there a maximum number of disks that scanner can handle?
Thanks
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.