I've been setting up a new system with Drivepool and Scanner. Drivepool has been working flawlessly, however Scanner has become so slow that it's completely unusable.
System background:
Windows Server 2016
Dual-core Opteron 6120s w/ 32GB of RAM
LSI9211-8i in IT mode split between a 24x SAS2 backplane and a 12x SAS2 backplane
~25 drives (totalling ~50TB)
I have applied the registry hack to fix drive spindown on the LSI card.
The program was fine initially, but as I added drives it became unusable due to the time it takes the GUI to respond; it is the only program that is exhibiting these issues. It sounds like the same problem that was mentioned as Issue #2 here:
I initially had StableBit.Scanner_2.5.1.3062_Release, but have since tried StableBit.Scanner_2.5.2.3122_BETA, and am now running StableBit.Scanner_2.5.2.3130_BETA, the late version that seems to be available to download. My methodology was to do an uninstall, restart, install, restart, try to use the software. So at this point, I am running 2.5.2.3130b.
On a side note, I didn't realize that Scanner's disk information was not stored anywhere on the disks themselves, but rather with Scanner. As a result of the un/reinstalls, I've also lost all of my drive bay information, as well as scanned status for all of the drives. I'd like to get this working fully before going through the hassle of determining anew which bay each drive is in.
Question
banderon
Hello,
I've been setting up a new system with Drivepool and Scanner. Drivepool has been working flawlessly, however Scanner has become so slow that it's completely unusable.
System background:
The program was fine initially, but as I added drives it became unusable due to the time it takes the GUI to respond; it is the only program that is exhibiting these issues. It sounds like the same problem that was mentioned as Issue #2 here:
I initially had StableBit.Scanner_2.5.1.3062_Release, but have since tried StableBit.Scanner_2.5.2.3122_BETA, and am now running StableBit.Scanner_2.5.2.3130_BETA, the late version that seems to be available to download. My methodology was to do an uninstall, restart, install, restart, try to use the software. So at this point, I am running 2.5.2.3130b.
On a side note, I didn't realize that Scanner's disk information was not stored anywhere on the disks themselves, but rather with Scanner. As a result of the un/reinstalls, I've also lost all of my drive bay information, as well as scanned status for all of the drives. I'd like to get this working fully before going through the hassle of determining anew which bay each drive is in.
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.