Alex Posted June 9, 2013 Posted June 9, 2013 Overall Supports Identify: Yes * Supports SMART: Yes ** * When using the RAID firmware and driver, but only on the first port.** When using the RAID firmware and driver, on all ports. RAID Firmware Firmware: 7.7.03 (7/1/2009)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.5.19 (4/21/2009)Si3132r5.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/O Methods: SmartIoCtl Identify: Yes * SDD: Yes SMART Status: Yes * SMART Attributes: Yes * SMART Thresholds: Yes * SMART Error Log: No Power Mode: No * Data is only valid on the first port of the controller (bug in controller driver). Workaround implemented in StableBit Scanner 2.4.0.2914+. StableBit Scanner - WMI SMART Status: Yes SMART Attributes: Yes SMART Thresholds: Yes SMART Error Log: No Power Mode: No Performance Burst: 109 MB/s Tested on Windows 8BASE Firmware Firmware: 7.3.05 (8/25/2005)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.1.14.0 (11/20/2007)SI3124.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/O Methods: None Identify: No SDD: Yes SMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No StableBit Scanner - WMI SMART Status: Yes SMART Attributes: Yes SMART Thresholds: Yes SMART Error Log: No Performance Burst: 110 MB/s Tested on Windows 8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.