Search the Community
Showing results for tags 'SATA Chip'.
-
Overall Supports Identify: No Supports SMART: No RAID Firmware Firmware: 4.3.84 (1/19/2007)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.0.14.1 (12/26/2007)SI3112r.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/OMethods: None Identify: No SDD: Yes SMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No StableBit Scanner - WMISMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No PerformanceBurst: 74.2 MB/s Tested on Windows 8 64-bit BASE Firmware Firmware: 4.5.02 (10/30/2008)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.2.15.3 (7/23/2009)SI3112.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/OMethods: None Identify: No SDD: Yes SMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No StableBit Scanner - WMISMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No PerformanceBurst: 78.8 MB/s Tested on Windows 8 64-bit
-
SAS Chip Marvell 88SE9485 SAS/SATA Controller Chip
Christopher (Drashna) posted a topic in Compatibility
Overall Identify: Yes* SMART: Yes* *Only available when using "Legacy mode" for the drives (not in a ARRAY nor JBOB) and when the UnsafeDirectIo method (detailed here). Card Details HighPoint uses slightly different configurations for each card, but all of the 2700 series uses this chipset. However, there are some differences between the drivers and firmware for each version, so we've opted to list the basic info here, and the specifics for each card on it's own page. HighPoint RocketRAID 2760 - Link HighPoint RocketRAID 2720SGL - Link StableBit Scanner - WMI SMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No StableBit Scanner - Direct I/O Methods: ScsiPassthrough, ScsiPassthrough48 Identify: Yes SDD: Yes SMART Status: No SMART Attributes: Yes SMART Thresholds: Yes SMART Error Log: Yes Power Mode: No (Thanks to Doug for doing most of this point initially!) -
Overall Supports Identify: Yes * Supports SMART: Yes ** * When using the RAID firmware and driver, but only on the first port. ** When using the RAID firmware and driver, on all ports. RAID Firmware Firmware: 7.7.03 (7/1/2009)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.5.19 (4/21/2009)Si3132r5.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/O Methods: SmartIoCtl Identify: Yes * SDD: Yes SMART Status: Yes * SMART Attributes: Yes * SMART Thresholds: Yes * SMART Error Log: No Power Mode: No * Data is only valid on the first port of the controller (bug in controller driver). Workaround implemented in StableBit Scanner 2.4.0.2914+. StableBit Scanner - WMI SMART Status: Yes SMART Attributes: Yes SMART Thresholds: Yes SMART Error Log: No Power Mode: No Performance Burst: 109 MB/s Tested on Windows 8 BASE Firmware Firmware: 7.3.05 (8/25/2005)AHCI compatible: No (proprietary driver required) Link: http://www.siliconimage.com/support/ Driver: 1.1.14.0 (11/20/2007)SI3124.sys Link: http://www.siliconimage.com/support/ StableBit Scanner - Direct I/O Methods: None Identify: No SDD: Yes SMART Status: No SMART Attributes: No SMART Thresholds: No SMART Error Log: No Power Mode: No StableBit Scanner - WMI SMART Status: Yes SMART Attributes: Yes SMART Thresholds: Yes SMART Error Log: No Performance Burst: 110 MB/s Tested on Windows 8