AMCross
-
Posts
80 -
Joined
-
Last visited
-
Days Won
6
Posts posted by AMCross
-
-
yep sorry its my ocd :-)
-
using the above program gives the same results so looks like its a controller issue :-(
-
ok my Gigabyte z77 motherboard has 10 onboard sata ports
6 using onboard intel c220 controller and 4 using onboard marvell
if I connect up 6 sata hd then the controller numbers show ok 0 to 5
if I connect up 10 drives it appears scanner can only show one port 0 and port 1 and port 2
as per the photo drive ( I ) should be 8
backup drive should be 9
drive J should be 10
so infact I should have as below
hd blu ray sata port 0
system drive port 1
3 tb red E port 2 All On Intel C220 Controller
3 tb red F port 3
3 tb red G port 4
3 tb red H port 5
3 tb red I Port 6
3 tb red J Port 7 All on marvel controller
3 tb red K Port 8
250 gb back up Port 9
Hope this makes sense
-
thanks christopher
decided to get it exchanged
just couldn't understand why the wd tool said smart pass
but scanner failed
pending sector count is the error and is increasing
-
as title
latest scanner beta is saying smart error on wd red 3tb
pending recount errors
but when I removed from server and ran wd utility it runs perfectly
any ideas
and happy new year to you all
-
no problem
trying to get my head round it
-
checked over the network
all folders for photos and video are duplicated
reproducing the issue maybe an problem
just noticed pictures from last years holiday which I know 100% were fine weeks ago are now like this
will check poolparts folder
-
hi all
not sure if its drivepool related but I am having issue with some pictures stored having the following effect as per attached
looks like pixels have moved
now im not sure how drivepool works but can it be the cause ?
running latest r c and latest scanner beta
-
sorry don't know what happened here as regards the screen shot
anyway rebooted three times and now back to normal
some windows updates and I thought a reboot might help and it did
very strange
-
as per title and screen shot
also had to use custom name in scanner as it showed "disk drive" where all the others show the full western digital description
just to add works fine just find it annoying
-
sorry to go off topic but how do you get scanner to show what controller each disc is connected to ?
-
I was running 447 and had the issue
im gonna wait till the next official release and hopefully it will be sorted by then
gone back to 446 and I have more color on my pie chart
although only 2 out of my five drives are not greyed out
-
I have the same problem even after I updated to the latest beta 447
also my drive pie chart is coloured grey only
and when I press the small pie chart I get the statistics are incomplete
-
what happens when you press the little blue pie chart to the left of the big grey one
My unit says statistics incomplete
-
im running the latest beta 2.1.0.446 and pressed remeasure and six/seven hrs later all my discs are still grey like your and all my drives are grey as well
problem is I have no % bar and when I press pool options it says measuring
I have 5 x 3 tb
-
still not 100% but much better
will need to do some checking before I finally close this issue :-)
still think scanner only works showing correct port when using one controller
use two onboard controller and things get untidy
will confirm in 24 hrs
-
-
Christopher
I also fell for the drive letter column when I first started using the product but this not the case here
when I added another drive as a system backup I now get
port 1 system drive c/d
port 2 data drive 1 e
port 3 data drive 2 f
port 4 data drive 3 g
port 0 data drive 5 h
port 5 data drive 4 I
port 8 system backup
think scanner or drivepool is getting confused with two onboard sata controllers
it should be
port 0 blu ray writer (obviously not shown in scanner)
port 1 system drive c/d
port 2 data drive 1 e All ONBOARD INTEL
port 3 data drive 2 f
port 4 data drive 3 g
port 5 data drive 4 h
port 6 data drive 5 I ALL ONBOARD MARVELL
port 7 system backup
lets see what alex finds when he rdp into my system as it maybe related
-
just to clarify the $9.95 saving on each product
I have scanner and drivepool on my whs 2011 server both products have the same activation code
so when I try to get the saving it only allows me on one product is this right ?
-
would second that request have two servers and five pc's would love to be able afford scanner on all the pc's other than the servers
-
thanks for your help christopher
-
hi
this might be difficult to explain but here we go
under scanner settings you can have the port number listed
I have made sure that under my bios that I have the following
port 0 hddvd/blu ray write
port 1 system drive c/d
port 2 data drive 1
port 3 data drive 2
port 4 data drive 3
port 5 data drive 4
all connected to the onboard intel sata controller
they all show up correctly under scanner UNTIL
my board also has 4 ports using the marvell controller
so when I add another 3tb hard drive on port 0 of this controller scanner shows
port 1 system drive c/d
port 2 data drive 1 e
port 3 data drive 2 f
port 4 data drive 3 g
port 0 data drive 5 h
port 5 data drive 4 I
is this a BUG ?
-
done the above and linked to this page
strange thing is
all my household pc (5 in total) I can goto mycomputer/network/servername and view all folders that are missing from dashboard etc
and also checked folders for content and it appears to be fine
so totally confused now
lets see what alex says
he might want to rdp into my system
-
clean install
first installed scanner and then drivepool
nothing else installed
New essentials 2012 r2 install error
in Off-topic
Posted
hi all
hope someone here can help me please
decided to get 2012 r2
pulled my working whs 2011 and installed new system drive with 2012 r2
all seems fine however
cannot see server on my network
can rdp into it
but it seems the server cannot also connect to the internet especially windows update
any ideas PLEASE :-(