Cory

For anyone coming to this later with a similar issue. I have no idea what caused this to occur, but am very very thankful that chkdsk /r /x on each disk was able to put the files/folders back where they belong. snapraid fix is running now and rebuilding the original failed drive from parity.

Hi all, I have SnapRaid set up with drivepool. My snapraid is as follows: disk d0 J:\PoolPart.0d5f9394-b13e-44bd-908f-37f55a976715 disk d1 K:\PoolPart.a4a16d2c-819c-45e7-bead-4f1568d5fbbf disk d2 L:\PoolPart.1c63d67b-3966-40f5-b622-0870a8d11be9 parity M:\SnapRAID.parity These are all pooled in Drivepool to a single drive letter (V). Drivepool is not doing any data duplication between them. Overnight, the J:\ (d0) drive failed. I was alerted to this by Drivepool alerting the disk was missing. I removed it and installed a new drive and attempted to repair the array with snapraid's fix commands. However, I found that the drivepool is totally gone, and I cannot see any files on any of the good drives in the pool, K and L. However, those disks still show that the space is used. I have tried everything I can think of, making sure hidden files are shown, etc. but am unable to find or see any of the files and restore my drives. Hoping someone has some help or suggestions. I will provide whatever additional information I am able to. Thanks