Search the Community
Showing results for tags 'windows 7'.
Found 3 results
Before I start, let me say that I did my best due diligence and read through and utilized these three related forum posts but none of them helped me resolve my issues: http://community.covecube.com/index.php?/topic/92-some-drives-not-recognized-by-drivepool/ http://community.covecube.com/index.php?/topic/1061-some-external-usb30-drives-not-recognized-by-drivepool/ http://community.covecube.com/index.php?/topic/1112-usb-hdds-no-longer-showing-in-drivepool-ui/ I am running the trial and doing extensive testing in a virtual machine before spending the money on a license for the DP software. I initially had no issues getting set up and running and it was a smooth process. However, I started playing around removing drives, deleting and re-adding vdi's in virtualbox, etc and now I am having issues with drivepool. Here is my current state after trying everything else I could think of including the suggestions from the above threads. My attempt here was to start with a clean slate: 1. I removed all drives in DP. 2. I uninstalled DP completely including deleting the associated appdata and programdata folders for DP. I also searched the entire registry and removed any references to DP or stablebit. 3. rebooted. 4. ran DISKPART clean on all test vdi drives to wipe them clean and not initialized. 5. shutdown. 6. In virtualbox, I removed all the vdi drives and deleted them completely off the host machine. 7. booted up, verified all the drives are gone, shutdown. 8. In virtualbox, I added all new vdi drives with new names/IDs to my virtual machine similar in size to what I did originally when things worked the first time. 9. booted up, computer management, storage, initialized all drives as GPT (note that I did all these steps with the drives MBR and had same results). 10. installed the latest beta of DP (I've gone through this whole process several times and did this all with the stable version as well, but had same results). 11. loaded up DP with the computer management in background (screenshot 1.jpg). Note that there are 7 "VBOX HARDDISK" options to choose from in non-pooled. 12. clicked add on the first "VBOX HARDDISK" in list (screenshot 2.jpg). New drive E created, new "drivepool" G created as expected. 13. click to remove E from pool (screenshot 3.jpg) 14. After removal, drive E no longer appears in the non-pooled list of drives as expected and there's 1 fewer drive to select from (6 instead of 7) (screenshot 4.jpg). I cannot get drives to reappear in DP one they've been formatted and are available for use in the O/S. 15. Use computer management to reformat E as "M" and format all the other drives "G" through "L." (screenshot 5.jpg). The only drive that appears in the non-pool list is L and all the others are still missing. Additional thoughts: - The first time through when it worked for me I was only using 6 drives instead of 7. It could be that L is only appearing because it's the 7th drive and therefore "new" to DP. - The first time through, I gave the drives a letter and everything worked. I removed them all and decided to use mount links instead to hide the drives in 'My Computer'. This also worked without an issue. - The problem may have come from the fact that I was reformatting, reinitializing, DISKPART cleaning, deleting and readding vdi's in virtualbox, etc without removing drives from DP pools first. I did receive some missing drive errors before doing the above clean slate steps above. Other things I've tried: 1. DISKPART cleaning and uniqueid of the drives. 2. Using mount links instead of drive letters. 3. Reset all settings in DP. 4. Nuking all drives from Virtualbox and adding new ones. Obviously something is funky/buggy with DP here since the drives all work just fine within windows after formatted. I am doing this testing in a VM specifically to try to break it or find issues. I don't know if it's only a virtual machine issue, but this isn't filling me with a lot of confidence for use with my real data and drives on my main box. I obviously won't be able to even do most of the steps above with real data without losing everything. I have attached a log that I ran while doing some of the above (no errors so not sure how helpful that will be). I have a drivepoolservice.dmp as per the suggestion in another thread, but apparently it's huge so I can't upload here... I will try to upload it using this link: https://stablebit.com/contact EDIT: The dumpfile zipped with 7z is still over 50MB and the filesize limit on the contact page is 10MB. Not much I can do. DrivePool.Service-2017-02-02.log
Hello all, I am just coming here to get specific instructions on how to safely and relatively easily format my current PLEX Media server PC, which i use Stable bit DRIVE POOL and Scanner on that main machine to monitor my Western digital RED HDDs 4TB (x4 in a drivepool using Stablebit). Long story short that pc is acting very very weird,slow, not loading half the time, and its freaking me out because my entire media collection are on those drives/pc. Seems that the motherboard and pc do not fully work right with Windows 10, so i guess i have no other choice but to format entire windows Drive (C: ONLY) and put windows 7 Ultimate on it, that way it will be more stable with windows 7 drivers, windows 10 hardly has any drivers for my old motherboard. (PC is about 6 years old, new gpu, and WD HDD's). hopefully RDP will be compatible between win 7 and my other win 10 machine ? but thats another issue for another day. I need to safely protect my data, and do a fresh install of windows 7 ultimate 64 bit, how do i do this without losing my data or causing issues, hopefully i can re-install everything back with ease, (stablebit, plex server) etc. i want the drives and letters are exactly the same. I would like to get the exact same setup except installed on win 7. Thanks PS: side note, i have an external HDD for backup purposes, how do i backup my media to it, without creating duplicates (some of the files already exist on there, i just have not updated my collection to the backup hard drive in a while so i dont know where im at, and dont want to waste space by trying to manually trying to put only the new media on there. (would take ages to figure out).
I'm using windows 7. I'm on the latest stable release of drivepool. I can't find any detail other than this bug that appears to have been ignored: https://stablebit.com/Admin/IssueAnalysisPublic?Id=1151 I keep getting the following error from google drive when trying to relocate the google drive folder to my drivepool drive: 'please select a folder on an NTFS drive that is not mounted over a network.' Not sure why google drive thinks this since the drive appears as NTFS in windows storage management and I'm not trying to mount over a network. Other thread where this was pointed out on a different o/s years ago: http://community.covecube.com/index.php?/topic/528-google-drive-and-stablebit-drivepool/