docjl61 Posted September 22, 2019 Share Posted September 22, 2019 I am using drivepool and scanner on 2 computers. The main one is running 16 hours a day, then goes to sleep automatically at night. The backup computer is only running a couple of hours per week; I am lead to believe it is insufficient running time to get the drives scanned. What settings can I change so Scanner can perform its scan much faster ? Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted October 1, 2019 Share Posted October 1, 2019 Unfortunately, there isn't a way to get that to happen. The scanning is a slow process that can take roughly 5 hours per TB. That said, there are a few things that may help. Try disabling the throttling settings.: https://stablebit.com/Support/Scanner/2.X/Manual?Section=Throttling Also, there is an advanced setting that will allow StableBit Scanner to scan multiple drives on the same controller at the same time. http://wiki.covecube.com/StableBit_Scanner_Advanced_Settings#Advanced_Settings It's the "maximum concurrent" setting. Try setting that to 0. Quote Link to comment Share on other sites More sharing options...
Question
docjl61
I am using drivepool and scanner on 2 computers.
The main one is running 16 hours a day, then goes to sleep automatically at night.
The backup computer is only running a couple of hours per week; I am lead to believe it is insufficient running time to get the drives scanned.
What settings can I change so Scanner can perform its scan much faster ?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.