Jump to content
  • 0

Scanner reporting almost all drives system damaged


denywinarto

Question

I swapped to new machine and OS yesterday morning,

from Windows 2012 r2 to 2016

New CPU, boards,  Installed OS from scratch

and I also changed the SAS card to faster one,

 

And i just reactivated scanner today,

But now it's saying all drives have system damaged issue.

Windows also warning me multiple times, throwing "restart to repair drive error"

 

I didnt turn off the JBOD when swapping machine though,

 

But drivepool seems to be fine, when i try to repair one of the drives with scanner,

it says" task failed, shutting down" or something like that

What should i do then?

Link to comment
Share on other sites

11 answers to this question

Recommended Posts

  • 0

Well i scanned 6 of my drives, 2 worked, it seems to chkdsk during startup, but the others just wont work, throwing "task failed, shutting down"

(I'm doing this partially everyday cause i want to minimize downtime)

those 2 drives seems to be normal again on scanner. but what about the other drives?

 

Link to comment
Share on other sites

  • 0

What controller card are you using now?

 

Also, is this for the surface scan? 
If so, try running the burst test on the drives in question. If that comes back with errors, there are communication issues with the drive, and not actually damaged sectors (but it ends up with the same result). 

And do these errors happen when manually running CHKDSK? 

Link to comment
Share on other sites

  • 0
2 hours ago, Christopher (Drashna) said:

What controller card are you using now?

 

Also, is this for the surface scan? 
If so, try running the burst test on the drives in question. If that comes back with errors, there are communication issues with the drive, and not actually damaged sectors (but it ends up with the same result). 

And do these errors happen when manually running CHKDSK? 

LSI SAS 9300 8e

I havent even started any scans, it just popped up after starting the scanner.

Havent had another chance to run chkdsk again, but last time there were 2 drives that also reports the same error using CHKDSK, and they were fixed already.

But the rest of the drives is giving " task failed, shutting down" when i try to fix them using scanner

 

Edit :  Hmm a minute, i'm running the drive repair one by one to the damaged drives again.and this is what i got :

 

So out of 14 damaged drives,

1 showing will be repaired on next shutdown

6 failed to repair, throwing task failed, shutting down

6 can be repaired successfully

1 showing : the volume cannot be repaired, there was no additional information provided as to why, you may run chkdsk from the command line to try to repair this volume

Another thing i noticed chris, the poolpart on each drives is no longer on hidden state,  IIRC werent they supposed to be hidden?

i will try running chkdsk tomorrow morning

Link to comment
Share on other sites

  • 0
3 hours ago, Christopher (Drashna) said:

Ok it was not up to date yet,

I installed that version and ran the scan on damaged drive again, but its still throwing rhe same error,  "task failed, shutting down"

Already sent the service.zip again for this version chris, please check it..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...