I had a drive go bad, so I pulled it and replaced it. I removed the bad drive and added the new drive back to drive pool so it would create a .PoolPart folder, then used SnapRaid to recover the data on that drive.
It all worked fine. No data loss.
But now, all the used space on the newly-replaced drive is marked as "other" data is DrivePool. Everything on the old drives is still marked a Unduplicated (I don't enable any data duplication).
Question
Wargazm
I had a drive go bad, so I pulled it and replaced it. I removed the bad drive and added the new drive back to drive pool so it would create a .PoolPart folder, then used SnapRaid to recover the data on that drive.
It all worked fine. No data loss.
But now, all the used space on the newly-replaced drive is marked as "other" data is DrivePool. Everything on the old drives is still marked a Unduplicated (I don't enable any data duplication).
Is this a problem or should I just ignore it?
Thanks.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.