I got a new Samsung SSD 850 EVO 1TB. It does not scan, instead it says "Waiting to scan (temperature equalization)". It has been in that state for hours.
When I look at SMART, it shows:
- It is running at 89F.
- Life Maximum:104F (Operating limit 158F, Physical damage limit: 158F)
- All the other attributes have a green check mark.
I submitted to BitFlock.com for analysis (ID: 7DNPDPHZ)
By reading other threads I also found the "suggested solution" to set the "Override maximum temperature", which I set to 155F. No change observed, it still won't scan.
Not sure what else to try. Any help will be welcome.
Question
bmelloni
I got a new Samsung SSD 850 EVO 1TB. It does not scan, instead it says "Waiting to scan (temperature equalization)". It has been in that state for hours.
When I look at SMART, it shows:
- It is running at 89F.
- Life Maximum:104F (Operating limit 158F, Physical damage limit: 158F)
- Life Minimum: 104F (Operating limit 32F, Physical damage limit: 32F)
- All the other attributes have a green check mark.
I submitted to BitFlock.com for analysis (ID: 7DNPDPHZ)
By reading other threads I also found the "suggested solution" to set the "Override maximum temperature", which I set to 155F. No change observed, it still won't scan.
Not sure what else to try. Any help will be welcome.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.