Jump to content
Covecube Inc.
  • Announcements

    • Christopher (Drashna)

      Getting Help   11/07/17

      If you're experiencing problems with the software, the best way to get ahold of us is to head to https://stablebit.com/Contact, especially if this is a licensing issue.    Issues submitted there are checked first, and handled more aggressively. So, especially if the problem is urgent, please head over there first. 
PJK3

StarTech PEXESAT322I PCI-Express x1 Dual Port SATA III (6.0Gb/s) Controller Card (2 Int or 2 Ext or 1 Int / 1 Ext)

Recommended Posts

Is it possible to get improved support / coverage for this card?   It was a good fit for my needs, as I needed a 9th internal SATA port and wanted eSATA support for a Port Multiplier later.

 

 

StarTech PEXESAT322I PCI-Express x1 Dual Port SATA III (6.0Gb/s) Controller Card  (2 Int or 2 Ext or 1 Int / 1 Ext)

 

Specifications

 

PEXESAT322I.main.jpg  PEXESAT322I.B.jpg  PEXESAT322I.C.jpg

 

Speed: SATA III (6.0 Gb/s)

Ports: 2 x eSATA, 2 x SATA, or 1 eSATA & 1 SATA (2 ports active at any time via jumpers)

Chipset: ASMEDIA ASM1061

 

Port Multiplier: Support on 2 ports, can use 2 PM at a time (1 to 4 Drives Supported Through Port Multiplier)

RAID: No

 

Windows AHCI Driver picked it up with default drivers.  (Did not record what driver it used.)

Installed ASMedia Tech Driver asstor64.sys 2.0.8.0 for PM support (have not tested a PM myself yet)

 

Tested on WHS 2011 64 bit

 

 

IO test  1.0.5171.26796

 

With Unsafe Direct I/O unchecked

 

StableBit Scanner - WMI

  • SMART Status: Yes
  • SMART Attributes: Yes
  • SMART Error Log: No
  • Power Mode: No
  • SMART Thresholds: Yes

StableBit Scanner - Direct I/O

  • Identify: No
  • SDD: Yes
  • SMART Status: No
  • SMART Attributes: No
  • SMART Error Log: No
  • Power Mode: No
  • SMART Thresholds: No
  • Methods: 

With Unsafe Direct I/O checked

 

StableBit Scanner - WMI

  • SMART Status: Yes
  • SMART Attributes: Yes
  • SMART Error Log: No
  • Power Mode: No
  • SMART Thresholds: Yes

StableBit Scanner - Direct I/O

  • Identify: Yes
  • SDD: Yes
  • SMART Status: Yes
  • SMART Attributes: Yes
  • SMART Error Log: Yes
  • Power Mode: No
  • SMART Thresholds: Yes
  • Methods: ScsiPassthrough, ScsiPassthrough48, ScsiMiniportPortDriver

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×