tomba Posted September 2, 2013 Share Posted September 2, 2013 If I want to replace an existing 2TB drive by a new 4TB, will Drivepool be able to handle a cloned disk? (as in I ghost the existing disk to the new one) Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted September 2, 2013 Share Posted September 2, 2013 As long as both disks aren't in the pool at the same time, there should be no issue. But why not add the 4TB to the pool, and then remove the 2TB? Namely, I ask, because that 2TB is likely formatted as "MBR", while that 4TB will most likely need to be formatted as GPT. (advanced formatting may not work when you clone the disks, which means you'd be limited to ~2TBs of space) Quote Link to comment Share on other sites More sharing options...
0 tomba Posted September 3, 2013 Author Share Posted September 3, 2013 As long as both disks aren't in the pool at the same time, there should be no issue. But why not add the 4TB to the pool, and then remove the 2TB? Namely, I ask, because that 2TB is likely formatted as "MBR", while that 4TB will most likely need to be formatted as GPT. (advanced formatting may not work when you clone the disks, which means you'd be limited to ~2TBs of space) The reason to clone is, is to not have to wait for the pool to empty the 2TB. Did that a couple of months ago and it took hours upon hours. Trying to save that time. But, if I understand you correctly it will work? (Cloning the data to the new disk will give me 2TB more space on the pool without having to wait for the data to copy out and back in?) Quote Link to comment Share on other sites More sharing options...
0 Shane Posted September 3, 2013 Share Posted September 3, 2013 Yes, as Drashna says, DrivePool should accept a cloned disk, just do NOT let it see both disks at the same time until you've removed the poolpart from the original disk. I'm curious, why not just start it as an overnight job before you go to sleep? That it will take hours shouldn't matter then. At 50MB/sec it would've taken under 12 hours, or less than the time between when you first posted and when Drashna replied. Hmm. Do you happen to recall exactly how many hours it took to remove your 2TB disk last time? Wondering if we should establish some benchmarks for removing disks (e.g. to help answer questions like "hey, it's been fourteen hours and my 2TB disk hasn't finished removing yet, is something wrong?"). Quote Link to comment Share on other sites More sharing options...
0 tomba Posted September 3, 2013 Author Share Posted September 3, 2013 Yes, as Drashna says, DrivePool should accept a cloned disk, just do NOT let it see both disks at the same time until you've removed the poolpart from the original disk. I'm curious, why not just start it as an overnight job before you go to sleep? That it will take hours shouldn't matter then. At 50MB/sec it would've taken under 12 hours, or less than the time between when you first posted and when Drashna replied. Hmm. Do you happen to recall exactly how many hours it took to remove your 2TB disk last time? Wondering if we should establish some benchmarks for removing disks (e.g. to help answer questions like "hey, it's been fourteen hours and my 2TB disk hasn't finished removing yet, is something wrong?"). Allright, glad that's settled. The reason to do it this way is mainly the sound (the server is near my bedroom) and costs (electrical). Also; the server is not very usable due to high diskload in the mean time The removal of the 2TB disk took several hours, about 10 if I recall correctly, but it was filled to the brim. Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted September 3, 2013 Share Posted September 3, 2013 Well, if everything was duplicated... you could have just pulled the drive, put in the new one, and then wait for it to duplicate to the new drive. That would have been the fastest way. Quote Link to comment Share on other sites More sharing options...
0 tomba Posted September 4, 2013 Author Share Posted September 4, 2013 Well, if everything was duplicated... you could have just pulled the drive, put in the new one, and then wait for it to duplicate to the new drive. That would have been the fastest way. Well not exactly everyting was duplicated but hey Thanks for your input! I have decided to go the 'normal' way, removing and adding. I will post the times needed here when I am finished! Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted September 4, 2013 Share Posted September 4, 2013 I'm just as guilty of the "not duplicating everything". I'd like to, but .... Also, you could use the "File Placement Limiter" balancer to force migration off the disk in question. That way, you don't have to sit waiting for the drive to remove. You can clear the data off and then quickly remove the disk. Quote Link to comment Share on other sites More sharing options...
0 tomba Posted September 6, 2013 Author Share Posted September 6, 2013 I'm just as guilty of the "not duplicating everything". I'd like to, but .... Also, you could use the "File Placement Limiter" balancer to force migration off the disk in question. That way, you don't have to sit waiting for the drive to remove. You can clear the data off and then quickly remove the disk. LOL, saw this a little bit too late The removing of the 2TB (containing about 1TB of data) took about 7 hours. I then placed the 4TB drive and since then Drivepool's been working for about 13 hours and is currently at 94,0% (Total disks in DrivePool; 3, 1 3TB and 2 4TB's) One thing I did notice is that StableBit Scanner started scanning concurrently with the duplication (because it's new of course). I would have expected it to wait with the surface scan until DrivePool is ready. Quote Link to comment Share on other sites More sharing options...
0 Christopher (Drashna) Posted September 7, 2013 Share Posted September 7, 2013 Tomba, did it say "scanning" or "waiting to scan"? Because normally, if there is disk activity, Scanner will delay the scan, as to not interfere with normal file operations. That, or, have you messed with that setting? Or, it was possibly low enough activity where it didn't trigger this delay in Scanner. Quote Link to comment Share on other sites More sharing options...
0 tomba Posted September 7, 2013 Author Share Posted September 7, 2013 Tomba, did it say "scanning" or "waiting to scan"? Because normally, if there is disk activity, Scanner will delay the scan, as to not interfere with normal file operations. That, or, have you messed with that setting? Or, it was possibly low enough activity where it didn't trigger this delay in Scanner. It was definitively scanning, saw this both in the dashboard and resource monitor (100MB/s scanning of DR1) Which setting do you mean exactly. Anyway, an update on the time everything took. - Disabling duplication on the biggest directory (2972GB) to allow the 2 TB to be removed: 2 hours - Removing the 2TB disk (which had about 1TB of data left): 7 hours - Re-enabling duplication on the directory to duplicate it to the 4TB: 7,5 hours Specs of the server: Dual Core Pentium Core2Duo E2220 (2,4GHz) 2GB of RAM 128GB Crucial M4 SSD (bootdisk) 1x Toshiba 3TB 7200 rpm 2x Hitachi 4TB 5900 rpm The 2 TB disk was a 5400 rpm Samsung disk Quote Link to comment Share on other sites More sharing options...
Question
tomba
If I want to replace an existing 2TB drive by a new 4TB, will Drivepool be able to handle a cloned disk? (as in I ghost the existing disk to the new one)
Link to comment
Share on other sites
10 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.