Search the Community
Showing results for tags 'upload'.
Found 4 results
Hi, I am posting here to see if anyone has any similar experiences when trying to upload data to GDrive via Cloud Drive using a similar setup. First, I have two hard drives connected, which are used as my cache disks. Not sure if the size matters, but one is 1 TB and the other is 1.5 TB. They were created about 1 year ago using the default allocation sizes, so the maximum each cloud drive can be is 32 TB each. I also use DrivePool to pool the Cloud Drives created on GDrive into one combined 64 TB drive. This is on an I5 2600k 3.6 Ghz with 16 GB ram on a Windows 10 Home OS. I have been having trouble recently while trying to upload from the local disks in that it seems that the PC needs to have the user logged in and active in order to upload anything. This isn't ideal because while I have a "decent" connection at 1 Gbps down, I only have 50 Mbps upload. I can usually achieve close to 50 Mbps during non-peak times, but throughout the day / busy hours, I usually max out around 30 - 35 Mbps. For this reason (and others), I typically try to let any data upload overnight while I'm sleeping. However, recently as in the last 3 to 4 weeks or so, I've noticed that even though my connection appears to be uploading throughout the night, the "To Upload" figure remains pretty close to what it was prior to going to sleep. For example, last night it said I had 199 GB left to upload to the cloud. I left my computer unattended uploading for 12+ hours (combined sleep and running errands throughout today) and when I checked just now, it says there is 184 GB left to upload. It seems kind of odd that I would have only uploaded around 15 GB in over 12 hours. My connection was steady throughout the night and no errors reported by Cloud Drive. Something may be related is that prior to going to sleep, I had cleared cache on the drive and the "To Upload" data (199 GB) and "Local" data (201 GB) were very close, around 2 GB difference. Upon returning to my computer, as mentioned the to upload was 184 GB, but my local was now at 534 GB. It almost seems as if the difference between 534 GB and 201 GB is what my connection should have uploaded during the 12 hrs, but for some reason it did not happen. This is not the first time something like this has happened either, it seems much more prevalent over the last several weeks, but I am not 100% sure when this behavior started. At first, I thought I was doing something wrong somehow, which still might be true. However, I think I found the pattern of this potential issue. It seems that when I "lock" my computer and am away from it, the issue described where my connection uploads, but doesn't actually upload much data will occur. It seems like this issue does NOT occur if I log on to the PC and just leave it unlocked and "active". I am doing a test now to see if this is true. To be clear, I am NOT logging the user out of Windows prior to letting it try to upload. I am simply locking the computer so it prompts for a password when someone tries to use it. I am also aware of the 750 GB max upload to GDrive per 24 hours. I don't think my upload speed is fast enough for that to come into play, but I have also tried waiting a few days by pausing the upload and the same thing would happen. Has anyone experienced anything remotely similar to this? If so, is there anything that can be done? I don't understand why it would upload while I am active on the PC, but not upload while its locked. Thanks for taking the time to read this.
Not sure if this is a new thing happening on 802 Beta or something i never noticed before. I'm uploading 60 GB of files thinking it will take 4 hours based on calculations. Four hours pass by and i notice i am only done with less than half of that. Luckily i had a network monitor running and it shows that i uploaded over 60 GB of data but SCD is only showing about 25 GB done uploading. Started looking at both SCD and network and it seems to be the case. Every 1 GB of upload from SCD requires 2-2.5GB of upload in network monitor. Opened up technical details (for the first time randomly) and noticing that some threads are uploading more than 100% How do i fix this? Is there a stetting that should be enabled/disabled? My cache was set to 10 GB expandable and the drive has 200 GB free space.
I uploaded the wrong folder to my drive, so I went ahead and deleted it but CloudDrive was still busy uploading all the remaining files (~18GB) I copied over. Is there any way to cancel this, by deleting the upload cache for example? When detaching the drive it gives the error that I'm busy uploading so that isn't really an option. Thanks in advance