Jump to content

rbutler81

Members
  • Posts

    48
  • Joined

  • Last visited

Everything posted by rbutler81

  1. I did the same thing as you... I deleted my drive, and started a new one. I uploaded about 7TB to that drive. It's been working fine for about a month, but in the last few days as started giving Checksum errors again, and not uploading. What is going on? How have I been able to use Clouddrive for years and not have this issue, and now twice in a month? Is there anything else to try?
  2. Hi there, I've already done some scanning of the forums, but haven't found anything conclusive... ... I have a Google Drive mounted CloudDrive, I'm using ver 1.2.1.1539. It's been working fine for a long time, but recently, I think maybe after an unexpected power outage, I'm receiving this error: I have 21.2 GB in my upload queue, that will not upload, but there's data constantly being downloaded (as witnessed in the UI). Is there something I can do to fix this? I can submit troubleshooting data against this ticket if that helps. Thanks in advance, R
  3. Hey guys, thanks for all the suggestions. It actually sorted itself out somehow.. I didn't make any other changes, and when I checked it the next day the gray "other" space was gone.
  4. I tried a few things.. but I still have this gray area showing. Any ideas? There isn't a way to see a list of files that falls into "other"? Also, check the screenshot below, I'm not getting the light blue arrows anymore, except for on one drive. I'm not sure if that matters, but it used to be there.
  5. Hey thanks for the reply.. I checked those things just now. Doesn't appear to have the GB of data that is showing as other.
  6. Hi there... I have a portion at the end of each of my drives in the pool that's gray, and described as "Other" data. I checked the drives, there isn't any data outside of the DrivePool folders - so everything should be part of the DrivePool. It's my understanding that if I added data to a drive outside of the DrivePool folder it would be recognized as Other. I've tried remeasuring, reduplicating, rebalancing.. all of which have left the drives with "other" data. Any ideas on how I can figure out what this is? Thanks.
  7. Hi all... there doesn't appear to be a way to do this, but maybe I missed it. I'd like to be able to schedule upload throttling on my cloud drive. Example: middle of the night when no one's using the internet, remove throttling (or set it to very high value). In the day when the internet is being used, throttle to 50% of upload bandwidtch (for example). If Cloud Drive is saturating my upload bandwidth, the quality of my internet for other devices drastically drops. I've played around with finding that 'sweet spot', but would love to schedule throttling. Thanks.
  8. I'm guessing this hasn't been rolled into the public release yet? I'm experiencing the same thing today on the newest public... I just downloaded the latest beta and installed it. Is there anything I have to do for this 'reorganization' to work, or does it happen without me explicitly telling it to? Thanks.
  9. I'm getting a "The file or directory is Corrupted and Unreadable" error when I'm trying to access a folder in my cloud drive. I can't even delete it, which would be fine if I could. I ran chkdsk /f /x - found a bunch of problems, but this one still remains. the cloud provider is Google Drive, although I don't think that matters. Any method of forcing a deletion of a file (Windows 10) involves deleting the file during Windows boot, which can't happen in this case because the cloud drive isn't mounted at that point. Any ideas on what I can do here?
  10. Hi there, I have a CloudDrive hosted on my Google Drive account. I've never had too many issues with it, other than occasional disconnects. Lately however, whenever I reboot my server, I've been getting notifications from Stablebit Scanner that this particular drive is damaged. When I open Scanner to have a look, beside the CloudDrive it says "File System Damaged." I've run chkdsk on it from a command prompt, it doesn't find any errors. I've also used Stablebit Scanner to try to fix the drive, but this also says there's nothing to fix when it runs. As far as I can tell, the drive is working. So, I'm not sure what this 'file system damage' is affecting. Can anyone help me with this? How to get it resolved? How to know what the damage actually is? I can attach any info that may be needed. Thanks.
  11. Hmmm... ok. I know about your Contact Us page but I thought I'd post it here in case anyone else someday had the same issue. I'll contact via the link and post what I find.
  12. DrivePool is telling me I have 753GB of files that cannot be moved because it can't satisfy the file placement rules. For the life of me I can't find what the conflict is, I didn't change anything... I added a new drive and set up some rules for it - those rules worked because I have the data I wanted on that new drive. Is there a way to see exactly what the conflict is? A way to see which files this message is referring to? Or which rules this is referring to? It would make it a lot easier to get this sorted out... In a log file somewhere? Thanks.
  13. Yeah, I'm using Win10 Pro ... should have mentioned that. I know about the Bitlocker / diskcryptor options... but what about the 'Local Disk' encryption options from within CloudDrive? Is that something to consider? Does it use hardware encryption?
  14. Hi there, I'm trying to figure out the best way to encrypt all my drives that are part of my DrivePool. Should I... a - use CloudDrive to encrypt each disk individually as a 'Local Disk' provider, then add each encrypted drive to the drive pool. b - add all the unencrypted drives to the drive pool, then encrypt the entire pool with CloudDrive as a 'Local Disk' and use the encrypted version of the pool c - use some 3rd party encryption program to encrypt the drives, then add them to the drive pool d - add all unencrypted drives to the pool, then use 3rd party encryption to encrypt the whole pool If I encrypt a drive with CloudDrive using the 'Local Disk' provider, does this leverage the AES instructions in my processor? Or does it do the encryption in a software layer? Thanks!
  15. Ok, so I installed it and rebooted... when DP loaded again it automatically started to remeasure. When it was finished it seems that it measured the SSD drive correctly. Nothing stored in the pool on the SSD was allocated as "Other". I'll keep an eye on this over the next little while as more files get added. Thanks.
  16. Ok, I'll do that now and let you know how it goes... I should remeasure when I get it installed?
  17. Oh, ok... I see it now: 2.1.1.561
  18. I opened the program up but don't see any indication of the version... where can this be found?
  19. So this morning two more media files were added to my pool. Before they were added I changed the balancing trigger to only balance at 5am everyday as to not try to balance while a file was being used. Both files that were added, were added to my SSD drive as "Other" - they were then uploaded by my 3rd party app. I just tried re-measuring to no success... files are remaining as "Other".
  20. The file may have been in use at the time of the first balancing (being uploaded to my Google Drive by a 3rd party app). No, I don't have duplication turned on for that particular folder - although I do have it turned on for a few other folders in the pool. At the time I tried manually re-balancing the file was not being used by any other process. The 3rd party app is InSync, it keeps designated local folders in sync with the same folders in your Google Drive. The file that was being shown as "other" was a media file that InSync was uploading. While it was uploading the balancer trigger may have prompted a re-balancing (trying to copy files off the SSD, onto the rest of the pool).
  21. Yeah, I tried that - by doing a re-measure I was able to recover about 3GB of the data.. but about 9GB remained as "other". I removed the SSD from the pool, this forced it to empty the drive - which it did. Then I re-added the SSD and set it up the same way (SSD Optimizer, etc... ) Don't think I should of had to do that though.
  22. Hi there, having a little issue. Recently when balancing has been triggered, not all of the new files added to the SSD are being moved off into the rest of the pool. See that gray area I've circled on the SSD drive? That's data that's part of the Pool. I'm not sure why it's showing as "Other" and why it isn't being moved off the SSD. I'm using the SSD Optimizer and it's been working fine until the last few days. Help! Thanks R
  23. Ok, I'll try that and see how she goes. Thanks for your help.
  24. Ok, but what if I want the functionality of another balancer as well? Which I do.. If this is not supported, then that's why I'm here asking questions.. to find that out. There should be a better explanation other than, "well, those balancers, they like to fight, so, uhhhh, turn the other ones off..." It's a good tip, and I thank you for that - I'm just looking for some actual technical details on how the program chooses to do what it does - so that I can get it to do what I want... Which includes: a. the SSD functionality that I've written about above, and b. the Drive Space Equalizer - "Equalize by the percent used" option Are these two options a possibility to work together? It seems that they should be able to. If so, can anyone share with me the proper configuration? Thanks.
×
×
  • Create New...