Jump to content

cechk01

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by cechk01

  1. I saw a similar issue where the drivepool service was using 1.5G of ram.
  2. this is what is see http://imgur.com/1NVh6y9 under the idenity button i see Commands supported 1: Smart, SecurityMode, MandatoryPowerManagement, WriteCache, LookAhead, HostProtectedArea, WriteBuffer, ReadBuffer Commands enabled 1: MandatoryPowerManagement, WriteCache, LookAhead, HostProtectedArea, WriteBuffer, ReadBuffer notice smart is missing how do I enable this? on an identical drive hooked up the the m1015 i see: Commands supported 1: Smart, SecurityMode, MandatoryPowerManagement, WriteCache, LookAhead, HostProtectedArea, WriteBuffer, ReadBuffer Commands enabled 1: Smart, MandatoryPowerManagement, WriteCache, LookAhead, HostProtectedArea, WriteBuffer, ReadBuffer These drives were both fresh from newegg, model number: ST4000VN000-1H4168
  3. So i restarted the service, I only see smart data for one drive. I Used the DirectIO Test tool and even with the Unsafe DirectIO box checked i still get no SMART Attributes. The drive is a 4TB Seagate NAS drive, I see Smart data for the other ones hooked directly up to my motherboard I'm on V 2.5.1.3062
  4. It was stock, I flashed it to HBA (IT)mode using this guide http://www.0x00.to/post/2013/04/07/Flash-IBM-ServeRAID-M1015-to-LSI9211-8i-with-UEFI-mainboard And now it works. The only this is that i cant get SMART data to be read by Scanner, I did set scanner to use UnsafeIO but that doesn't seem the help
  5. I just recently installed a M1015 SAS card. When i look at the card in device manager is says Error card could not start Code 10. I installed different drivers and and nothing seems to fix it. Any suggestions?? OS is Windows 7 pro X64
×
×
  • Create New...