Jump to content
  • 0

Stablebit Drivepool continually "checking"


falco

Question

I have a problem with Stablebit Scanner I was hoping somebody could help with.

About every two or three days when I reboot the server, on reboot it will not “find “the  pool  and to fix this problem I have to disconnect all the data hard drives and reboot connecting one at a time, and then everything works ok for another 3-4 days. BUT while everything is working ok if I go into stablebit software and down the bottom just above the version number, it says “checking” and just sits there “checking “ and never changes. The pie chart on the left showing the pool is totally greyed out symbolising “other”

Picture here http://i556.photobucket.com/albums/ss8/johnyfalco/DrivePool/Drivepool_zps5161b57e.jpg

 

Here is my hardware.

 

New install of Win 8.1 OS x64

Stablebit Drivepool v2.0.0.420

16Gb  Corsair RAM

AsusP9D-WS motherboard   https://www.asus.com/Motherboards/P9D_WS/specifications/

C226 Chipset

1 x SSD for OS

5 x 4Tb Seagate ST4000VN000 Data Drives

650w Corsair PSU. (Tried two different PSU’s )

Does anybody know why this does not finish the checking. I have tried re install, and repair but this will not fix it.

I tried installing Stablebit scanner on this set up also but had to take it off, as I could not get it to boot past the welcome screen.

 

Help appreciated

 

 

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

With me on a 2x2TB system with 2x0.8TB used (2x duplication on everything), "checking" takes, I donnow, 24 hrs?. Perhaps it is just taking very long?

 

It would be very helpful if "checking" would give a bit more detail on how far along it thinks it is.

Link to comment
Share on other sites

  • 0

Could you grab the error reports from the system:

http://wiki.covecube.com/StableBit_DrivePool_2.x_Error_Reports

 

and a memory dump of the DrivePool Service?

http://wiki.covecube.com/StableBit_DrivePool_Service_Memory_Dump

 

 

Also, would you mind updating to the latest beta version (2.1.0.552, on the front page) and see if that works better.



As for Scanner causing the system to hang, could you reinstall and do this:

http://wiki.covecube.com/StableBit_DrivePool_System_Freeze

Link to comment
Share on other sites

  • 0

With me on a 2x2TB system with 2x0.8TB used (2x duplication on everything), "checking" takes, I donnow, 24 hrs?. Perhaps it is just taking very long?

 

It would be very helpful if "checking" would give a bit more detail on how far along it thinks it is.

 

This problem does not get past checking, no percentage indication and it will do it for days on end.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...