DP duplication stuck at 0.2% for 2 days. Any way to find out why? Log file(s)?

[montejw360]

After my failed drives hassle DP can't seem to get past 0.2% when Duplicating. It's been there for a couple days now. Is there a log file I can check to see what the problem is?

 

Is there another way to give DP the boot to make it move? I won't be surprised if it's a hardware issue, but I don't know how to find out what the exact issue is. I've got a Mediasonic Probox 8 bay drive enclosure that's been working for years. USB 3.0. Just had 2 drives fail in quick succession. Removed one, but the other died before I could "remove" it. And I hadn't been able to get the duplication done from removing the first drive when the second one died. 

 

That's where I'm at. Any help is appreciated.

 

[Christopher (Drashna)]

Restarting the service should "boot it" as you've said.  To do this, run "services.msc", find the "StableBit DrivePool Service" and restart it. 

 

It may take a while to complete, if it has ran into an issue. 

 

 

If this continues to happen, then try enabling file system logging and re-run the duplication pass (or just let it run). 

http://wiki.covecube.com/StableBit_DrivePool_2.x_Log_Collection

[montejw360]

Tried restarting the system, making sure the service was running, etc. No help. Finally figured out (at least I think) that it was a folder that was set up as a local web site running xampp I believe. ServerPress. I totally gutted the permissions and was able to delete the folder, nothing there I needed. DP is making progress now. Slow, but progress.

[Christopher (Drashna)]

Well, glad to hear it.  Hopefully, it completes properly then. 

[montejw360]

still working on it. DP got stuck hours later. Using http://wiki.covecube.com/StableBit_DrivePool_Q5510455I modified it a little. I changed the ownership first, then set the permissions. I tried doing it all at once, but it stalled. Changed ownership completely, restarted, then changed permissions. DP is working better.

 

For now....

[Christopher (Drashna)]

Well, I'm glad to hear that you were able to reset the permissions. 

 

Let me know if you do run into any more issues, or if you still have issues measuring.