Jump to content

RocketRAID 2302


Kevin2437

Recommended Posts

Hiya

 

I am using one of these cards in my N40L with an external Hornettek Dual Bay SATA case via an eSATA cable.

 

I also have an OCZ-Vertex3 SSD on one of the internal connectors as the boot drive.

 

All drives show as Legacy in RocketRAID BIOS screen

 

I have selected Unsafe in DirectIO and I can now see the SMART details for the SSD and one of the drives in the external case.

 

Is there any way I can get both drives in the external case to pass SMART info?

 

The case has DIP switches which allow selection of Normal(current setting), RAID0,RAID1 and JBOD.

 

Kevin

Link to comment
Share on other sites

What mode is the enclosure in?

 

And once the Unsafe option is enabled in DirectIO, it should work with the HighPoint card just fine.

 

However, could you download the "DirectIoTest" tool from here:

http://community.covecube.com/index.php?/topic/36-how-to-contribute-test-data/

 

 

Run it on the system and select the disk that is having issues. It should (hopefully) light up the "SMART Attributes" option for either the WMI or DirectIO (or both) section.  If it does, click on the ellipse ("....") button and make sure it's listing information.

 

If it is, then let us know.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...